Content
Forget about dirty grout: 4 ways to clean the gaps between tiles without effort
26.02.2025 17:50
Dirty grout between tiles can ruin even the most stylish interior.
The tiles shine, but the gaps between the tiles darken, become covered with a film, and cleaning them is a whole story.
In this article, we will tell you about four simple and effective ways to clean grout that will deal with dirt without any extra effort.
Method 1: Baking soda and vinegar - a classic that works
This duo is a real find for lovers of affordable and natural solutions. Almost everyone has soda and vinegar, and together they easily deal with dirt.
How to use:
Sprinkle baking soda over the grout to coat the problem areas.
Spray the baking soda with vinegar (you can use a spray bottle).
Wait 5-10 minutes - the mixture will begin to bubble, softening the dirt.
Wipe the seams with a damp cloth or lightly scrub with an old toothbrush.
Important: Do not use this method on natural stone (e.g. marble) - vinegar can damage the surface. It is better to test on a small area before starting.
Method 2: Hydrogen Peroxide - Bleaching Without Chlorine
Hydrogen peroxide is ideal for grout that has darkened or yellowed. It's a safe and inexpensive way to restore its cleanliness.
How to use:
Dilute hydrogen peroxide with water in a 1:1 ratio.
Apply the mixture to the seams with a sponge or spray.
Leave for 15-20 minutes.
Wipe with a damp cloth. For stubborn stains, repeat or use a brush.
Tip: Add a little baking soda to the mixture to enhance the effect - the seams will become even whiter.
Method 3: Toothbrush and toothpaste - simple and affordable
Toothpaste is not just for teeth! It does a great job of removing dirt from joints, especially if you don't have any other tools at hand.
How to use:
Squeeze a small amount of toothpaste onto an old toothbrush.
Rub the seams in a circular motion.
Leave for 5 minutes.
Rinse with water and pat dry.
Personal experience: I tried this method in the kitchen and the greasy stains disappeared right before my eyes. Simple and inexpensive!
Method 4: Steam cleaner - for those who are willing to invest
A steam cleaner is fast and effective, plus it disinfects the seams. A great option if you are not afraid to spend money on equipment.
How to use:
Fill the device with water and turn it on.
Direct the steam stream towards the seams, moving slowly along the gaps.
Remove the softened dirt with a damp cloth.
Warning: Check if the steam is suitable for your tile. Some materials (plastic, wood) may be damaged by high temperatures.
Useful tips
Regularity is key. Clean the grout once a month to prevent dirt from becoming embedded.
Test the products. Before using, test the method on a small area.
Seam protection: After cleaning, apply a special product to keep the seams clean longer.
Conclusion
Now you have four easy ways to make the grout between tiles perfectly clean. Choose the one that you like: soda with vinegar, hydrogen peroxide, toothpaste or a steam cleaner. Cleaning will no longer be a problem, and your home will shine with cleanliness without extra effort. Good luck - may your grout always be impeccable!
