How to properly wash a jacket so that there are no lumps: secrets of impeccable cleanliness without compromising comfort

12.10.2024 03:10

Washing a jacket can be a real challenge for an unprepared person.

The wrong approach threatens not only the loss of appearance, but also the appearance of unpleasant lumps that can ruin your favorite thing.

However, knowing a few simple secrets, you can easily cope with this task and keep your jacket in perfect condition for many years.

Preparing for washing

Before you start washing, you should carefully read the care label.

The manufacturer usually specifies the optimal washing mode, water temperature and other important parameters. You should fasten all zippers and buttons, turn the jacket inside out. This will help protect the outer surface from damage and prevent creases.

lock
Photo: Pixabay

Choosing a Detergent

To wash a jacket, it is best to use special products designed for outerwear. They gently clean the fabric without damaging the water-repellent impregnation.

Regular powder can be too aggressive and cause lumps. Liquid products are considered more gentle and dissolve effectively in water.

Correct washing mode

Most jackets are recommended to be washed on a delicate cycle at a temperature no higher than 30 degrees.

High temperatures can damage the filler and cause it to clump. The spin cycle should be set to minimum speed or turned off completely to avoid deformation of the product.

Peculiarities of washing different types of jackets

Down jackets require a special approach. To prevent the down from clumping, add a few tennis balls to the washing machine drum.

They will break up the lumps that form during washing. Jackets with synthetic filler are less capricious, but also require careful handling.

Drying is an important stage

After washing, the jacket should be carefully straightened and hung on wide hangers. Dry in a well-ventilated room, avoiding direct sunlight and heat sources.

Periodically, you need to shake and knead the jacket with your hands to evenly distribute the filler and prevent lumps from forming.

Getting back into shape

If small lumps still form after washing, you can try to break them up with your hands. Lightly patting the problem areas will help restore the original shape of the filler. In the case of down jackets, you can additionally roll the jacket with tennis balls.

Professional dry cleaning

For particularly difficult cases or expensive jackets, it is better to contact a professional dry cleaner.

Experts know how to properly handle different types of fabrics and fillings to avoid lumps and other problems.

Author: Valeria Kisternaya Editor of Internet resources

Content
  1. Preparing for washing
  2. Choosing a Detergent
  3. Correct washing mode
  4. Peculiarities of washing different types of jackets
  5. Drying is an important stage
  6. Getting back into shape
  7. Professional dry cleaning